Posted - Wednesday, 10 April 2013
Lubricants for ship engines will have to evolve along with the changing
bunker fuel market, as more stringent emission controls come into play,
said Total lubmarine technical director Jean-Philippe Roman in an
interview with Platts Tuesday on the sidelines of the Sea Asia 2013 show
in Singapore.
With the evolving regulations on ship emissions by the various Emission
Control Areas as well as the International Maritime Organization's
global sulfur cap limits becoming more stringent in 2015-2020,
shipowners have to start considering alternative fuels, other than heavy
fuel oil, to power their ships.
The current focus is on alternatives such as distillates and LNG to
comply with stricter global sulfur regulations. Lubricants for these
same ship engines will have to evolve along with the type of marine fuel
used, Roman said.
For existing conventional diesel engines that currently run on heavy
fuel oil, most ships use two types of lubricants to ensure engines run
smoothly, and the combination of the two is usually "double trouble,"
according to Total marketing and analysis manager Serge Dal Farra.
If there were a mismatch in both types of lubricants, it would result in severe engine damage, said Dal Farra.
The problem usually occurs when the basicity of the lubricant is high
and the sulfur level in the marine fuel is too low, this could mean more
calcium carbonate deposits in the ship's engine, potentially causing
severe damage, Roman said.
The level of basicity usually determines how well the lubricant can
break down the acid that makes up the sulfur in marine fuels.
With marine fuels expected to contain less sulfur, the type of lubricant
used would need to evolve along with the level of sulfur in marine
fuel, especially with some ECAs now mandating a maximum of 1% sulfur, he
added.
With ship engines designed to use LNG as bunker fuel, these cannot use
the same type of lubricants used in conventional engines that run on
heavy fuel oil, as these contain calcium carbonates, Roman added.
The other challenges include designing a lubricant mix that will also
work in dual-fuel ship engines that can switch between heavy fuel oil
and LNG or heavy fuel oil and distillates, which is one of Total's key
focuses in the next few years, said the technical director.
Total is also working on coming up with the next generation single
cylinder oil lubricant which would reduce some of the problems in a
two-type lubricant mix and is aiming to launch it sometime in 2015,
Roman said.
Roman expects that most ships will still use heavy fuel oil, with a significant level of distillate use in ECA zones.
The reality of LNG as marine fuel is still a while away, with the global
supply infrastructure not fully in place, and while the price of LNG
looked attractive now, it might not necessarily be the case in future,
Roman said.
Source: Platts
Post to be found at:
http://www.hellenicshippingnews.com/News.aspx?ElementId=f8969c7e-a00d-4325-a15e-0967bbb1ff88&utm_source=newsletter&utm_medium=email&utm_campaign=daily
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment