Posted - October 23, 2013 - Hellenic Shipping News Worldwide
IMO’s Working Group on the Evaluation of Safety and Pollution Hazards
of Chemicals (ESPH 19), meeting at IMO Headquarters from 21 to 25
October, has agreed to classify high-viscosity PIB (Polyisobutylene) as
category X for carriage by ship, thereby prohibiting the discharge of
cargo residues into the sea. The categorization and carriage
requirements for high-viscosity PIB will be included in the annual
MEPC.2/Circular on the Provisional categorization of liquid substances,
usually issued by IMO on 17 December each year and will be put forward
for inclusion in the next edition of the International Code for the
Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
(IBC Code) which lists chemicals and their hazards and gives both the
ship type required to carry that product as well as the environmental
hazard rating. Amendments to the IBC Code are put forward on an annual
basis so the next amendments would be considered during 2014, for
inclusion in the IBC Code with an effective implementation date of 1
July 2016.
Category X under the International Convention for Prevention of
Pollution from Ships Annex II Regulations for the control of pollution
by noxious liquid substances in bulk includes noxious liquid substances
which, if discharged into the sea from tank cleaning or deballasting
operations, are deemed to present a major hazard to either marine
resources or human health and, therefore, justify the prohibition of the
discharge into the marine environment.
For substances under category X, a tank from which a substance in
Category X has been unloaded, must be prewashed before the ship leaves
the port of unloading. The resulting residues must be discharged to a
reception facility until the concentration of the substance in the
effluent is at or below 0.1% by weight.
MARPOL Annex II lists four categories for noxious liquid substances carried in bulk:
• Category X: present a major hazard to either marine resources or
human health and, therefore, justify the prohibition of the discharge
into the marine environment;
• Category Y: present a hazard to either marine resources or human
health or cause harm to amenities or other legitimate uses of the sea
and therefore justify a limitation on the quality and quantity of the
discharge into the marine environment;
• Category Z: present a minor hazard to either marine resources or human
health and therefore justify less stringent restrictions on the quality
and quantity of the discharge into the marine environment; and
• Other Substances: considered to present no harm to marine resources,
human health, amenities or other legitimate uses of the sea when
discharged into the sea from tank cleaning of deballasting operations.
Previously, PIB was classified as category Y material but there was no
differentiation between high or low viscosity grades. Low-viscosity PIB
will remain as a category Y product.
Source: IMO
Post to be found at:
http://www.hellenicshippingnews.com/News.aspx?ElementId=4c580613-d76c-4f3b-90c6-eeb1ab967a3e&utm_source=newsletter&utm_medium=email&utm_campaign=daily
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment